Fast, complete, efficient waste disposal

• Dual chamber combustion.

• Chambers insulated and lined with high temperature refractory.

• Programmable digital temperature controls and chart recorder.

• Modulating control for fuel and air lowers fuel consumption.

• Preheat and secondary chamber temperatures up to 2000° F and two (2) second retention

The Benefits of Incineration . . .

The P60 range of incinerators are designed to burn disposables that can and should be destroyed on-site. These wastes include infectious and contaminated "red bag," surgical dressings, plastic test devices and other wastes. If your 100 to 400 bed hospital is paying a high fee to haul these waste materials to a disposal site, now is the time to consider on-site incineration.

On-site incineration is a thorough, fast, and cost effective way to dispose of medical waste. Inciner8’s P60-M2 incinerators are engineered to meet strict air emission regulations with dual chamber combustion. Our modular design is easy to install.

Medical Incinerator Models

P60-4GLP-M2 Propane fired incineration system complete with two burners, secondary chamber, stack, timer and digital temperature control, with two second retention.

P60-4GN-M2 Natural gas fired incineration system complete with two burners, secondary chamber, stack, timer and digital temperature control, with two second retention.

Charging Rate

Up to 1,500 pounds per ten-hour day of typical red bag waste rated at 10,000 BTU's per pound with up to 10% pathological material rated at 1,000 BTU's per pound. Dependent upon density, BTU value of the waste, and subject to reloading regulations. Additional time may be required for burnout of final charge.

 Specifications Summary

• Primary chamber dimensions (external)   51" W x 75" L x 67" H

• Primary chamber volume  58.4 ft.3

• Secondary chamber dimensions (external)

• Upper section 96" L x 60" D

• Lower section 62" L x 42" D

• Secondary chamber volume 137 ft.3

• Secondary preheat temperature 1800° - 2000° F

• Secondary operating temperature 1800° -2000° F

• Secondary retention time 2 seconds

• Height to top of secondary chamber 16' 5.5"

• Automatic loader/hopper volume 15 ft.3

• Loader ram Pneumatically powered (Optional hydraulics)

• Ash door opening 19" x 36"

• Stack dimensions 24" O.D. x 18" I.D. x 49" L

• Insulation 1", 1900° F mineral wool

• Refractory Primary chamber 4"

• Overall dimensions  19' L x 10' W x 33' H

• Total weight 24,000 lbs. approx.

• Suggested pad size 20' W x 30' L x 6" thick

• Gas service 4,400,000 BTUH

• Electrical service 115V 60 Hz. 30 amp

• Water service 0.81 gpm @ 60 psi

• Compressed air 9.5 cfm @ 100 psi, with 30 gallon reserve

• Fuel consumption*  Natural gas - 1600 CFH  LP - 17.5 GPH

All Rights Reserved.