 Ease
of use
Auto ignition. No pilots to light. Set
the timer and walk away.
Single burner
reduces maintenance cost.
Fuel efficiency
Rapid incineration means low fuel
consumption.
Thick
refractory lining in main chamber retains heat, increasing
efficiency.
Quality built to last
Heat resistant aluminized steel.
Stainless steel
stack.
The benefits of incineration . . .
SANITARY -Waste can be
destroyed as fast as it accumulates. Nothing is left to spread
disease or to attract rodents and flies.
CONVENIENT - Fill the chamber
and turn on the burner. No watching required since timer
automatically shuts down burner. Alternative methods frequently
require more time to manage and maintain.
THOROUGH - Leaves only
sterile white ash and brittle bone fragments. Reduces 100kg. of
animal carcasses or waste to approximately 5kg. of sterile
residue.
Applications
Thousands of
incinerators are being used to dispose of animal carcasses and
other pathological waste.
Features
overview
-
Designed for
economical performance.
-
100kg
capacity.
-
Low profile
for easy loading and ash removal.
-
Refractory
lined to retain heat for efficient operation.
-
Available
with LP, Natural gas or fuel oil burner
Specifications
|
A200-1G |
Single burner
gas-fired incinerator |
|
A200-1O |
Single burner oil-fired
incinerator |
|
Waste Chamber |
|
Chamber capacity (Type IV
waste-animals) |
100 kg |
|
Chamber volume |
.18 m3 |
|
Chamber size
(outside) |
Width |
66 cm |
|
Height |
81 cm |
|
Length |
107 cm |
|
Door dimensions |
46 x 66 cm |
|
Height to door |
76 cm |
|
Height to top of chamber |
81 cm |
|
Suggested slab size (l x w x thick) |
1.8 m x 2.4 m x 10 cm |
|
Stack |
|
Dimensions |
30 cm dia., 152 cm L |
|
Material: Stainless steel |
1.52 mm thick |
|
Burners
|
|
Operation |
manual timer |
|
|
General |
|
Electrical service |
Standard |
115 volt, 60 HZ,
20 amp |
|
|
Also
available |
220 volt, 50 HZ,
10 amp |
|
Total weight (approx.) |
|
454 kg |
|
Fuel consumption |
|
Fuel oil |
2.5 GPH |
9.5 l/hr |
|
LP |
3.0 GPH |
11.4 l/hr |
|
Natural gas |
275 CFH |
7.8 m3/hr |
The DEFRA (U.K.)
Approved Model A200 (A)
Main Features
The main
changes from the existing A200 model incinerator are as follows: -
-
A secondary
chamber fitted on top of the existing incinerator.
-
15 to 20 minute
warm up time to 850 deg. C in secondary chamber as per the EU WID
and ABPR
-
A lean
burning dual burner unit with warm up, incinerate, and cool
down stages.
-
A
temperature probe with high visibility readout fitted near to the
outlet.
These changes have ensured that the
unit meets the 2-second retention time at temperatures in excess of
850 deg. C.
Benefits of The New A200 (A) Incinerator
-
Extremely clean burn unit.
-
Top loading design so there is no
chance of leaks / contamination from the burn chamber.
-
The new afterburner and chamber can
be retro fitted to existing, older models to bring them up
to standard.
-
Only requires a 10 amp electric
supply to run the motors.
-
Cost effective fuel consumption.
-
Oil, propane or natural gas
available.
-
Designed specifically for disposal
of poultry and animal carcasses.
-
Each burner is set on a timer and
will shut down when at ‘0’
Reduces 100kg of
carcasses to approximately 9kg of sterile ash residue
New
Mobile Incinerator Available
Inciner8 have teamed up with the
very well respected 'Ifor Williams Ltd' to have available a heavy
duty but lightweight trailer which is suitable for both the model
A200 and Model A400 incinerators. Please
contact us for more details and specifications.
 |
Click
