Ease of Use

Auto ignition. No pilots to light. Set the timer and walk away.

Single burner reduces maintenance cost.

Built-in skid facilitates placement

Fuel Efficiency

Rapid incineration means low fuel consumption.

Higher burn rate than smaller models.

Thick refractory lining in main chamber retains heat, increasing efficiency.

Quality Built to Last

Heat resistant aluminized steel.

Stainless steel stack.

Continuous welded bottom seams for durability

The Benefits of Incineration . . .

SANITARY - Waste can be destroyed as fast as it accumulates.
Nothing is left to spread disease or to attract rodents and flies.

CONVENIENT - Fill the chamber and turn on the burner.
No watching required since timer automatically shuts down burner.
Alternative methods frequently require more time to manage and maintain.

THOROUGH - Leaves only sterile white ash and brittle bone fragments.
Reduces 400kg of animal carcasses to approximately 20kg of sterile residue.

Applications

Thousands of incinerators are being used to dispose of animal carcasses and other pathological waste.

Hinged 16" x 6" ash door  makes cleanout quick and easy

Features Overview

• 400kg load capacity.

• Low 36" chamber height for easy loading

• Hinged ash door for convenient cleanout.

• Heavy-duty industrial refractory lining retains heat for efficient operation.

Specifications Summary
MODEL	A850-1G Single burner gas-fired incinerator
	A850-1O Oil burner model under development
WASTE CHAMBER
Chamber capacity  (Type IV waste - animals)		400 kg
Chamber volume		.75 m³
Chamber size (outside) (less burner and counter weights)	Width	113 cm
	Height	114 cm
	Length	152 cm
Door opening		53 x 69 cm
Height to door		91 cm
Height to top of stack		4.8 m
Suggested slab size  (L x W x Thickness)		2.4 m x 3 m x 10 cm
STACK	2'-14" dia. (36 cm), 14 gauge (1.90 mm) aluminized steel, refractory lined
	8'-12" dia. (30.5 cm), 16 gauge (1.52 mm) stainless steel
BURNERS	LP or natural gas burner with electronic flame safety and spark ignited intermittent pilot. Oil burner under development.
Operation	One 12-hour manual timer
ELECTRICAL SERVICE		Standard - 115 volt, 60 HZ, 20 amp
		Also available - 220 volt, 50 HZ, 10 amp
TOTAL WEIGHT (approx.)			1820 kg
FUEL CONSUMPTION	LP	7.2 GPH	27.3 l/hr
	Natural	660 CFH	18.7 m³/hr

 

The DEFRA (U.K.) Approved Model A850 (A)

 

Main Features

The main changes from the existing A850 model incinerator are as follows: -

• A secondary chamber fitted on top of the existing incinerator.

• 15 to 20 minute warm up time to 850 deg. C in secondary chamber as per the EU WID and ABPR

• A lean burning dual burner unit with warm up,  incinerate, and cool down stages.

• A temperature probe with high visibility readout fitted near to the outlet.

 These changes have ensured that the unit meets the 2-second retention time at temperatures in excess of 850 deg. C.

Benefits of The New A850 (A) Incinerator

• Extremely clean burn unit

• Top loading design so there is no chance of leaks / contamination from the burn chamber.

• The new afterburner and chamber can be retro fitted to existing, older models to bring them up  to standard.

• Only requires a 10 amp electric supply to run the motors.

• Cost effective fuel consumption.

• Oil, propane or natural gas available.

• Designed specifically for disposal of poultry and animal carcasses.  Each burner is set on a timer and will shut down when at ‘0’. Reduces 200kg of carcasses to approximately 9kg of sterile ash residue.