Ease of Use

Auto ignition. No pilots to light. Set the timer and walk away.

Single burner reduces maintenance cost.

Fuel Efficiency

Rapid incineration means low fuel consumption.

Higher burn rate than smaller models.

Thick refractory lining in main chamber retains heat, increasing efficiency.

Quality Built to Last

Heat resistant aluminized steel.

Refractory lined stack and stainless steel stack.

The Benefits of Incineration . . .

SANITARY - Waste can be destroyed as fast as it accumulates.
Nothing is left to spread disease or to attract rodents and flies.

CONVENIENT - Fill the chamber and turn on the burner.
No watching required since timer automatically shuts down burner.
Alternative methods frequently require more time to manage and maintain.

THOROUGH - Leaves only sterile white ash and brittle bone fragments. Reduces 300kg of animal carcasses to approximately 15kg of sterile residue.

 Applications

Larger capacity. Perfect for various agricultural uses. Thousands of incinerators are being used to dispose of  carcasses and other pathological waste.

Features Overview

• Designed for economical performance.

• 300kg capacity.

• Low profile for easy loading and ash removal.

• Ash removal door and rake

• Refractory lined to retain heat for efficient operation.

• Available with LP,  natural gas, or oil burner.

Specifications Summary
MODEL	A600-1G Single burner gas-fired incinerator
	Add "N" to model for natural gas.
WASTE CHAMBER
Chamber capacity  (Type IV waste - animals)		300 kg
Chamber volume		.54m³
Chamber size (outside) (less burner and counter weights)	Width	91 cm
	Height	86 cm
	Length	152 cm
Door opening		66 x 76 cm
Height to door		84 cm
Height to top of stack		5.4 m
Suggested slab size  (L x W x Thickness)		1.8 m x 2.4 m x 10 cm
STACK	2'-14" dia. (36 cm), 14 gauge (1.90 mm) aluminized steel, refractory lined
	8'-12" dia. (30.5 cm), 16 gauge (1.52 mm) stainless steel
BURNERS	LP or natural gas burner with electronic flame safety and spark ignited intermittent pilot Diesel or Kerosene available
Operation	Manual timer
ELECTRICAL SERVICE		Standard - 115 volt, 60 HZ, 20 amp
		Also available - 220 volt, 50 HZ, 10 amp
TOTAL WEIGHT (approx.)			1,400 kg
FUEL CONSUMPTION	LP	2.5	11 l/hr
	Natural	350 CFH	10.0 m³/hr

The DEFRA and EU ABPR Compliant Model A600 (A)

Main Features

The main changes from the existing A600 model incinerator are as follows: -

• A secondary chamber fitted on top of the existing incinerator.

• 15 to 20 minute warm up time to 850 deg. C in secondary chamber as per the EU WID and ABPR

• A lean burning dual burner unit with warm up,  incinerate, and cool down stages.

• A temperature probe with high visibility readout fitted near to the outlet.

 These changes have ensured that the unit meets the 2-second retention time at temperatures in excess of 850 deg. C.

Benefits of The New A600 (A) Incinerator

Extremely clean burn unit

·     Top loading design so there is no chance of leaks / contamination from the burn chamber.

·     The new afterburner and chamber can be retro fitted to existing, older models to bring them up  to standard.

·     Only requires a 10 amp electric supply to run the motors.

·     Cost effective fuel consumption.

·     Oil, propane or natural gas available.

·     

      Designed specifically for disposal of pathogenic and animal carcasses.

·     Each burner is set on a timer and will shut down when at ‘0’

Reduces 300kg of carcasses to approximately 15kg of sterile ash residue

New Mobile Incinerator Available

Inciner8 have teamed up with the very well respected 'Ifor Williams Ltd' to have available a heavy duty but lightweight trailer which is suitable for both the model A200 Model A600 and Model A400 incinerators. Please contact us for more details and specifications.